Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS1155316
These are the slide brackets for the bottom drawer.
This part works with the following brands: GE, Hotpoint & Kenmore.
Removed old bracket (2 screws), ordered new bracket and installed. Discovered that the bracket had been redesigned due to numerous failures as described above.
Help other customers find the most helpful instructions.
Were these instructions helpful?
The part was pretty expensive but was very simple to fix. This company did a good job. Again, kind of expensive (>$100 for a pair of drawer slides) but simple to fix.
With an allen wrench, I removed the remaining and broken drawer slide brack assembly on the bottom of the refridgerators right side. I then installed the new right-handed drawer slide bracket assembly in a similar fashion. The freezer handle easily snapped into place. The entire process was completed within ten (10) minutes.
Repair is as simple as removing and replacing two screws that hold the bracket and spacer to the refrigerator wall. The only catch is that the screw is not a phillips head but a star. Luckily I had a multi-tip screwdriver set.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.