Quick Question!

Have you ever purchased from PartSelect.com before?

1155105-1-S-GE-WH13X10024        -Dual Water Inlet Valve
1155105-1-S-GE-WH13X10024        -Dual Water Inlet Valve 1155105-2-S-GE-WH13X10024        -Dual Water Inlet Valve 1155105-3-S-GE-WH13X10024        -Dual Water Inlet Valve http://www.partselect.com/Schematics/GE/00112584i01.gif

Dual Water Inlet Valve

PartSelect Number PS1155105

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will not stop filling with water.
  • Leaking.
  • No hot or cold water.
  • Will not fill with water.

Compare At

$67.03

You Save

$11.17

Your Price

$55.86
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 35 reviews What's this?
31-35 of 35
 

0 of 1 people found this instruction helpful

Parts Used:
  • Dual Water Inlet Valve
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Rachel from Charlotte, NC

Washing machine was leaking cold water

I removed the four screws at the top of the washing machine and pulled the front cover off. I unscrewed the two screws that was holding the valve and disconnected the sockets. Last put on the part and connected two wires and put screws back in and reconnected the hoses and washing machine is working perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Milton from Riverview, FL

Cold water would continue to run and over flow from washer

1. Removed 2 knobs
2. Removed 4 screws from the top of front panel and opened
3. Disconnected a small hose and two electrical connection and removed the Water level pressure switch
4. Replaced switch in reverse order
5. Disconnected hot/cold water hoses, removed three screws and four electrical connectors and removed water valve (Valve water)
6. Replaced valve in reverse order
7. Reinstalled front panel with 4 screws and reinstalled two knobs.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Dual Water Inlet Valve
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: BILL from YORK, PA

Water wouldn't stop filling.

Changed the dual water inlet valve.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Dual Water Inlet Valve
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Philip from Story City, IA

No cold water

New dual water inlet valve.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Dual Water Inlet Valve
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Pliers
Customer: Robert from Archer, FL

Freezing water

removed top and replaced .

Help other customers find the most helpful instructions.

Were these instructions helpful?   

31-35 of 35