1145727-1-S-Frigidaire-134509600         -Drum Vane
1145727-1-S-Frigidaire-134509600         -Drum Vane 1145727-2-S-Frigidaire-134509600         -Drum Vane 1145727-3-S-Frigidaire-134509600         -Drum Vane http://www.partselect.com/Schematics/Frigidaire/HZVQ2R9M.gif

Drum Vane

PartSelect Number PS1145727

Sold individually.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $86.95
  • You Save

    $14.49
  • Your Price

    $72.46
In Stock
Order within the next 11 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

SCREW

Part Number 417463

Order within the next 11 hrs and your part ships today!
$5.57
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 6 reviews What's this?
1-6 of 6
 

15 of 19 people found this instruction helpful

Parts Used:
  • Drum Vane
Level of Difficulty: A Bit Difficult
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Ken from Rhinelander, WI

Broken washing machine vane

Totally unable to move old vane using instructions on this site. Wound up breaking old unit in pieces to remove. Installed very easily. However when trying to install enclosed screw (which you are supposed to install through vane into tub) it did not line up even close to hole drilled into tub. I had wondered why the original vane didn't have a screw in it, now I know.

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 16 people found this instruction helpful

Parts Used:
  • Drum Vane
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: vernon from middlebourne, WV

Drum vanes broke

placed small plillips screwdriver in center hole of old vane and pulled vane toward front of washer and lifted up out of slots. (You need to press down tabs in center of drum slot to insert new ones) Placed new vane at front of slot and squeezed togeather so both sides went in slots and with screwdriver in center hole of vane pushed to rear of washer till vane locked. Incerted screw that came with kit to hold in place DONE.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Gary from Grand Junction, CO

Broken / loose vane

Removed broken Vane and reinstalled replacemnet real time repair 2 minutes. It took longer to open box than to fix.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used:
  • Drum Vane
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Robert from Boyertown, PA

Drum vane broke

The part ordering and arrival was very easy and fast. Problem with the directions on removing the damaged drum vane. They were not clear directions. Once I figured out what needed to be done it went easy

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Glen from Redondo Beach, CA

Vane broke off inside drum

Inserted new vane into slots in the drum. I then held the front of the drum while I slid the vane tabs in place by pushing the vane to the back of the drum. Once the vane was in place, I screwed in the screw that came inside the vane kit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used:
  • Drum Vane
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: KAS from LYNNWOOD, WA

Broken washer drum vane

I follow the instruction that comes with the part. The only thing different is I use wd-40 , to slide the vane better.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-6 of 6