Control Panel Console

1. Remove two screws in back and slide top up an back a little. 2. Remove soap tray by depressing button in back. 3. Unscrew control panel and pull out. Unplug electrics from wall. 4. Unscrew electronic panel from control panel console and re-attach to new console making sure control buttons are correctly aligned and in place. 5. Screw control panel back onto washing machine, replace top with screws in back and slide soap tray back in. Boom, you're done!

First I removed the visible screws on the front of control panel. When I tried to remove it I realized it was also being held in place by the top coverof the washer. I next removed the screws holding the top cover in place and slid it back uncovering a few more screws holding the control console in place. The wiring pane was also held on the console with screws so i roved them and popped the old console out. After that I just replaced everything in reverse order and screwed the new console back in place. The door handle was alot more simpler. All I did there was open the door and remove the two visible screws on the inside of the door and the broken handle came off. I placed the new handle in place and screwed it on. These repairs were simple and once done I realized that it took no time at all.