Quick Question!

Have you ever purchased from PartSelect.com before?

1145039-1-S-Frigidaire-316436000         -Infinite Burner Switch - Small Element - 240V
1145039-1-S-Frigidaire-316436000         -Infinite Burner Switch - Small Element - 240V http://www.partselect.com/Schematics/Frigidaire/9OOZSWQ0.gif

Infinite Burner Switch - Small Element - 240V

PartSelect Number PS1145039

This is a part for your range. This switch controls the stovetop surface burner. If you notice that your stove top is not turning on or is not adjusting to the corresponding desired heat, it is mostly likely due to the burner switch needing to be replaced. You will need a #1 square-head screwdriver and needle-nose pliers. Disconnect the power from the range. You will need to move the range out from the wall to remove the upper back panel to access to this part. This is an OEM genuine part.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, KENMORE®, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Element will not heat.

Compare At

$33.82

You Save

$5.64

Your Price

$28.18
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 4 reviews What's this?
1-4 of 4
 

42 of 60 people found this instruction helpful

Parts Used:
  • Infinite Burner Switch - Small Element - 240V
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Gerald from Paris, TN

Switch was making a arcing sound when burner was on

Removed the back cover of the range. Removed the knob from the front of the switch. Removed 2 screws holding switch to range. Removed wires one at a time and connected to proper poles on replacement switch and reinstalled new switch on range

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16 of 27 people found this instruction helpful

Parts Used:
  • Infinite Burner Switch - Small Element - 240V
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: PERRY from LECANTO, FL

New switch was not wired like old one

i first replaced element after old smoked & quit. replaced switch but i noticed when i started to replace the wires one at a time something didn't seem right. after checking the #s on the old one, they didn't match up with the new one.luckily i had the stove diagram from a packet on the back of the stove. i traced each wire according to the diagram and everything worked out fine. i'm just glad i didn't replace each wire to wire.the #'s were on the switch where each wire went which was different than the org. even though they looked the same.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: James from Caldwell, ID

The indicator light for burners broke and shorted agaist the back panel on range

This caused the burner switch cotacts to arc burning out the switches. It took 30 or 43 minutes to replace the switches and put the range back together. The bake element took 10 min. ti replace. Grandma has her range back and I am a happy grandpa!! Thanks for the help and we saved over $170.00 for the repairs. Jim Johnson

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Infinite Burner Switch - Small Element - 240V
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver
Customer: junius from WICOMICO, VA

Burner switch work sometime.

I follow the video on your site

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4