http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/9OOZSWQ0.gif
See part 54 in the diagram

Infinite Burner Switch - Small Element - 240V

PartSelect Number PS1145039

This switch controls the stove top surface burner.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Cooktop element not heating.
  • Compare At

    $29.42
  • You Save

    $4.90
  • Your Price

    $24.52
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 3 reviews What's this?
1-3 of 3
 

18 of 32 people found this instruction helpful

Parts Used

  • Infinite Burner Switch - Small Element - 240V

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerGerald from Paris TN

Switch was making a arcing sound when burner was on

REMOVED THE BACK COVER OF THE RANGE. REMOVED THE KNOB FROM THE FRONT OF THE SWITCH. REMOVED 2 SCREWS HOLDING SWITCH TO RANGE. REMOVED WIRES ONE AT A TIME AND CONNECTED TO PROPER POLES ON REPLACEMENT SWITCH AND REINSTALLED NEW SWITCH ON RANGE

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 16 people found this instruction helpful

Parts Used

  • Infinite Burner Switch - Small Element - 240V

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerPERRY from LECANTO FL

New switch was not wired like old one

i first replaced element after old smoked & quit. replaced switch but i noticed when i started to replace the wires one at a time something didn't seem right. after checking the #s on the old one, they didn't match up with the new one.luckily i had the stove diagram from a packet on the back of the stove. i traced each wire according to the diagram and everything worked out fine. i'm just glad i didn't replace each wire to wire.the #'s were on the switch where each wire went which was different than the org. even though they looked the same.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerJames from Caldwell ID

The indicator light for burners broke and shorted agaist the back panel on range

This caused the burner switch cotacts to arc burning out the switches. It took 30 or 43 minutes to replace the switches and put the range back together. The bake element took 10 min. ti replace. Grandma has her range back and I am a happy grandpa!! Thanks for the help and we saved over $170.00 for the repairs. Jim Johnson

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3