1021347-1-S-GE-WD26X10025        -Drain Pump Assembly
1021347-1-S-GE-WD26X10025        -Drain Pump Assembly 1021347-2-S-GE-WD26X10025        -Drain Pump Assembly 1021347-3-S-GE-WD26X10025        -Drain Pump Assembly

Drain Pump Assembly

PartSelect Number PS1021347

This part will drain water from the appliance in different cycles.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Not draining.
  • Compare At

    $62.02
  • You Save

    $10.34
  • Your Price

    $51.68
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

42 of 46 people found this instruction helpful

Parts Used

  • Drain Pump Assembly

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerSteven from Lompoc CA

Dishwasher was not draining, water left in tub

The repair was very easy and went smoothly. Here's an overview of the steps I followed: I used a shop vac to remove as much water as possible from the dishwasher tub. I turned off the water supply to the dishwasher and then removed two screws that connect the dishwasher unit to the cabinet/counter top. I also removed two screws at the bottom of the dishwasher to remove the dishwasher's kickplate. After that I pulled the dishwasher out and uplugged the unit then tipped it on it's side to gain access to the pump assembly (it's at the bottom of the unit). The drain pump assembly was held in place by two screws and a metal band that connects the pump to the rubber/plastic drain area. Also there are two wire leads needed to be unplugged. I took a picture of the unit before removing anything so I could have a record of what it all looked like assembled. Then I took off the old pump and put on the new and put it all back together. Turned the water back on and ran a quick rinse and spin cycle and all was well! Dishwasher drained properly and there were no leaks. Easy and I saved a bit of money doing it myself.

Help other customers find the most helpful instructions.

Were these instructions helpful?

22 of 28 people found this instruction helpful

Parts Used

  • Drain Pump Assembly

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerKATHY from LAS VEGAS NV

Dishwasher was not draining

We pulled the dishwasher out completely, drained water that was in the dishwasher. Tilted the dishwasher and the part we needed to replace (Pump Drain Assembly) was in clear view. We used a screwdriver to take out a few screws and replaced the Pump Drain Assembly with the new one. Put the dishwasher back in and proceeded to wash dishes in the now fixed dishwasher. The part was very easy to change out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2