This is the replacement wave guide cover for your microwave. It is white in color and is approximately 3 ½ inches long and 4 inches wide. It has two small tabs at the top that allow it to lock into place. The wave guide cover transmits microwave radiation while preventing steam and food particles from interacting with the sensitive electronic components of the microwave. If your wave guide cover is damaged or missing, it will need to be replaced. Be sure to disconnect power from the microwave before you begin this repair. This part is sold individually and is an OEM part.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
General Electric.
Part# WB48X10047 replaces these:
AP3875584, 1167706
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.2
Filter By Rating:
5 Stars
7
4 Stars
0
3 Stars
2
2 Stars
0
1 Star
1
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Agnieszka S - June 16, 2021
Verified Purchase
Great part and easy to install!
The part what I ordered was great. My microwave was flashing sparks and we ordered the part. Came in 7 days and was easy to replace and we didn’t need to buy new microwave so I am very happy. I highly recommend!!!
★★★★★
★★★★★
Cuc L - June 2, 2020
Verified Purchase
Great part, easy repair
The part was great condition
★★★★★
★★★★★
Jose D - May 15, 2019
Verified Purchase
Great Part
better than the original!
★★★★★
★★★★★
Richard H - March 4, 2019
Verified Purchase
DID NOT SOLVE MY PROBLEM
THE GUIDE SAID MOST OF THE TIME A NOISY OVEN NEEDED THE PART WE ORDERED
ALSO TOOK 2 1/2 WEEKS TO GET THE PART
★★★★★
★★★★★
Mike V - January 16, 2019
Verified Purchase
Part is better than original
Part is designed differently than original but works better
★★★★★
★★★★★
Christian C - December 28, 2018
Verified Purchase
snaps right in - no tools required
The previous repair on this microwave had a special plate installed that looked bad and kept falling out of place. We smelled a burning smell and noted black burn marks where there were gaps. It only took 3 days to get this part and it snapped in without any tools. This resolved the issue and looks much better than the previous repair job.
★★★★★
★★★★★
John R - December 13, 2018
Verified Purchase
as advertised. slow shipping
brief title tells it all.
★★★★★
★★★★★
Harry H - October 9, 2018
Verified Purchase
Easy to install. A lot better then orginal
In good condition when I received the part
★★★★★
★★★★★
Louis G - August 17, 2018
Verified Purchase
Much better than the original cover
The original wave guard was a thin rectangle held in place by two small plastic rivets. One of the rivets came off and was lost. This replacement is simple to install, fits great and matches the interior of the GE microwave perfectly. They should have used this originally.
★★★★★
★★★★★
Kathy T - May 30, 2018
Verified Purchase
Did not fit
It was the wrong part. Did not fit. Not the part number I ordered. No not working.
July 6, 2018
Thank you for your review. I’m sorry to hear that happened. We have contacted you about this and look forward to trying to help you with your issue.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Wave guide cover one of the pins holding it in place was missing / cover loose
I simply removed the other push pin holding in the old cover and put the bottom in first and snaped into place at the top. The whol job took less than 5 minutes.
Jim from FORT COLLINS, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Avril
March 10, 2018
My microwave is making loud noises upon consecutive uses. It gets much louder each time the microwave is used consecutively. It sounds like maybe the fan? Can this be repaired? If so, what parts do I need, and can I do this repair myself or do I need to hire someone?
For model number PEB7226DF1WW
Hello Avril,
Thanks for your question. Given your description, you may need the exhaust fan motor, part number PS8754502. We would highly recommend only having a licensed technician install this part, as your microwave's internal parts can contain electrical charges even when the unit is unplugged.
I hope this helps.
I submitted a question re: My microwave making loud noises upon consecutive uses (sounds like the fan getting louder and louder) and was told to purchase a wave guide cover (part select #ps1020520; man part #wb48x10047. Can this part be installed by myself (if so, how?), or do i need to have a professional install? Thank you.
For model number PEB1590DJ1WW
Hi Avril,
Thank you for your question. This is a fairly easy part to install. It should snap it place. If you have any issues, you may need to call a technician to come and help you. Before you begin any repair please unplug the appliance from the electrical outlet. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
