Quick Question!

Have you ever purchased from PartSelect.com before?

1020205-1-S-GE-WD22X10047        -Lower Spray Arm - Gray
1020205-1-S-GE-WD22X10047        -Lower Spray Arm - Gray 1020205-2-S-GE-WD22X10047        -Lower Spray Arm - Gray http://www.partselect.com/Schematics/GE/00125688i05.gif

Lower Spray Arm - Gray

PartSelect Number PS1020205

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Not cleaning dishes properly.

Compare At

$32.95

You Save

$5.49

Your Price

$27.46
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 3 reviews What's this?
1-3 of 3
 

17 of 33 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Wrench (Adjustable)
Customer: James from Portsmouth, NH

The dishes were not getting cleaned

I pulled out the racks and decided to take off the upper (mid) arm. It came off with an adjustable wrench. When I looked at the arm I could tell that some of the holes were blocked. Some debris had gotten lodged in the holes and were blocking the water flow. I used tweezers to remove the debris and it solved the problem. I then pulled out the lower arm and cleaned it with warm water. There were soap deposits and I wondered if other debris could be blocking this as well. Finally I went onto the web site and saw that for $40 including shipping I could replace these parts with brand new parts. I did and the machine washes like new again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: Mary from LARAMIE, WY

Emit holes partially plugged and metal of lower arm separated

lower arm lifts off and new sets right on. The upper arm needed a "holding" screw removed (from under the shelf) and replaced with the new arm.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 53 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Robert from Sacramento, CA

Front gasket leak, jets clogged, keypad shorted out

Based on parts select diagrams, I removed the sprayer arms and replaced them along with new washers/bushings.
I simply pulled the front gasket out

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3