1019542-1-S-GE-WD12X10189        -Adaptor Pump Assembly
1019542-1-S-GE-WD12X10189        -Adaptor Pump Assembly 1019542-2-S-GE-WD12X10189        -Adaptor Pump Assembly 1019542-3-S-GE-WD12X10189        -Adaptor Pump Assembly

Adaptor Pump Assembly

PartSelect Number PS1019542

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Leaking.
  • Compare At

    $40.48
  • You Save

    $6.75
  • Your Price

    $33.73
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 3 reviews What's this?
1-3 of 3
 

9 of 9 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers, Wrench(Adjustable)

CustomerHossein from Tarrytown NY

Rodents ate the sump inlet so machine leaked everywhere!

Turned off electric at the fuse box and shut off the water. Pulled the dishwasher out and took out bottom sprayer (pull up and twist), filter basket etc. Then put the washer on its back and removed sump inlet and adaptor. This entails removing a couple of hose clamps and 4 bolts that hold sump inlet in place. Replaced with new. Turned over the machine and reinstalled the filter basket and sprayer after cleaning them. Reconnected the water and turned on the power. Machine works like new!!! Total parts cost me less than $50. Repair guy wanted around $300 to do it!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 5 people found this instruction helpful

Parts Used

  • Adaptor Pump Assembly

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerAndrew from Staten ISland NY

Mouse had chewed through the adapter pipe

Removed the dishwaher from under the counter. Removed the adapter pipe by removing two nut drive jubilee clamps. inserted the new adapter pipe in the alignment grooves, Tightened the jubilee clamps. Tested the unit on rinse cycle. Reinstaled dishwasher under the counter. Easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Adaptor Pump Assembly

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Wrench(Adjustable)

Customerpaul from arlington MA

Leak under the appliance

After finding the leak source I have targeted the piece part on your web. It came 2 days after and I replaced the defective part by the new one. I switch off the water, untied the nut to release the pipe, take out the part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3