1019010-1-S-GE-WD03X10026        -Spring Plunger
1019010-1-S-GE-WD03X10026        -Spring Plunger

Spring Plunger

PartSelect Number PS1019010

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will Not Start.
  • Door latch failure.
  • Compare At

    $5.39
  • You Save

    $.90
  • Your Price

    $4.49
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Interlock Plunger

Part Number 1993857

$2.79
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

20 of 24 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMICHAEL from ORLEANS IN

Would not start

First I removed the 6 screws that hold the inside cover on the door.Then I remover the plastic cover over the switches,pulled out the switches and disconnected the 2 wires from each switch and connected connected them to the new switches exactly as they were on the old switches.Then reinstalled the switches in their holders.I then removed the plunger and spring from between the switches and installed the new spring and plunger exactly like the old one was installed.I reinstalled the door cover making sure everything was in it's place,I put the screws in the door cover and I was done.It was a very simple job. Mike

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 6 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerJAMES from MAYFIELD UT

Cover, interlock heats ups and bends causing switch problems

Ordered your new and improved Interlock cover made with better plastic (Thank You). Your new SPRING is also better. It's bigger and longer and is now the right size. (Thank You). Your parts are better than OEM. The INTERLOCK is easy to get to. The OEM one is black and you can see that it is bulged. The replacement one is Gray Speckled with white and black. You can see the improvement by just making a comparison.Just unclip the old one and clip in the new one.. Repace panel cover. Now it works and should work now for many a year. THANKS! Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJessica from Chicago IL

Dishwasher wouldn't start/reset

Very simple. Took off back cover with screwdriver. Popped off back cap found in center top inside. Replaced spring and white stick looking thing. Put black cover and then back panel back on. Instantly worked again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3