BBB A-Plus
1015754-1-M-GE-WB25T10042-Light-Lens.jpg
1015754-1-S-GE-WB25T10042-Light-Lens.jpg 1015754-2-S-GE-WB25T10042-Light-Lens.jpg

Light Lens

PartSelect Number PS1015754

This part works with the following brands: GE, Hotpoint & Kenmore.

In Stock

  • Compare At

    $2.80

  • You Save

    $.47

  • Your Price

    $2.33
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-2 of 2

 

1 of 2 people found this instruction helpful

Parts Used

    • Light Lens

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJewel from Nacogdoches TX

The temperature indicator light on the oven was broken.

I removed the control panel by removing 7 screws and replaced the light indicator and lens.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsWrench(Adjustable)

CustomerCharles from Damascus MD

The indicator light stopped working

I knew the lens (which also holds the light) was broken. I also ordered the light. I flipped the circuit breaker, raised the stove top and removed the 6 nut-head screws holding the cover plate. A nut driver would have been helpful, but I got by with a 6" crescent wrench. I removed the cover. I unplugged the two wires from the old light and plugged in the new one. I inserted the new lens and slipped the light over it. I flipped the circuit breaker on to make sure it worked. After flipping the circuit breaker off, I replaced the cover plates and the screws and lowered the stove top. I flipped the circuit breaker on. It worked!

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-2 of 2