Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS10064571
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Unscrew 3 screws at the top of the dryer. Remove face plate and discounted 6 leads connecting them to the new control board as you take them from the old one.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Back panel removes easily. Remove control board wire connectors(remembering where they go is tricky) attach new board plug in wires and presto!
First, I removed the screws from the top of the panel. I removed all wires from the control board and attached them to the new control board. I then snapped the new board in place. SUPER EASY!!! Tightened screws on top panel and tested dryer. Works like a charm!
Could not have been easier! Removed 3 screws above the control panel which allowed the removal of the front of the panel. The control board was only held on by 2 tabs....no screws, and removed easily. Simply transferred all the leads from the old board to the new one, there were only 5 or 6, then snapped new board in, reconnected the panel, and 3 screws later I had a completely functioning dryer again.For this Sears was going to charge me $160.00 for the part and $160.00 for labor!
My husband got a screwdriver to open the dryer control panel. He pulled the burned control board out and put the new one in that we got from partselect.com. We tried the dryer and it worked! I took like five minutes to install. It was so easy! It saved us $130 by not calling a service technician to come over and check the machine.
received part day after we ordered the control board. My husband was working that day, so I installed it myself. Was pretty easy to do. I took a picture of how the old one was connected, and then I took the old one out, and put the new part in. It now works great. Thank you we saved 150.00 installing it ourself.
Researched problem on line. Many others had same symptums after power outages and Hurricane Irene. Dryer was in use when power went off, back on, back off than on again. Dryer would not work more than a few seconds. LED lights would go off; Drum did spin; Heater elements came on. All symptoms pointed to the control board. Replaced board and dryer is working now. Reports state that this particular control board is very susceptable to power bumps and will fail.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.