Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS10062929
The upper dishrack, a vital part in a dishwasher, holds the dishes in place as the dishwasher goes through its cycle. If the wheels are missing/broken, the upper rack is damaged, or it starts to rust, replacing and installing a new dishrack could solve this problem. Customers rate this installation process as easy and no tools are required. Make sure to remove any items on the top rack before unhooking the tab of the rack stop on both ends and pulling it from the rail. Next step is to remove the upper spray nozzle and replace it with new one. Refer to the manual instructions for further guidance.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
Replaced racks and removed silverware holder, glass holder and water sprayer from old rack and attached to new rack with very little trouble. The only thing different with the new lower rack, is that it does not have the collapsible racks to use for pots.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Found rack fairly easily on this site. Ordered reluctantly because I wasn't sure I ordered the right part or if I could install it.Received item really quickly. It was correct and easy to install. I'm not a great home "repair guy", but this worked out very well. I would order from them again in a second.
I pulled out the racks, transferred the snaps and installed the new racks, wala it was ready to go. Very pleased with the quick delivery of the parts.Thanks
I used the screwdriver to remove the piece in the middle top ,it came off easily. Took out the bottom rack replaced them both in about 15-20 minutes.
Bottom rack was simply lift up and replace with new rack.Upper rack took a couple minutes to figure out how to take the roller brakes off and remove the nozzle. Once those were removed, it was easy to put them back on the new rack. The screwdriver was used to pry the nozzle holder off of the old rack.
Removed the old racks and spray assembly. Matched the parts and removed the needed wheel assemblies with a screw driver and snapped them onto the new racks. The spray arm was very easy. It took removing one part and then reassembling it with the new one. Everything works good.Parts arrived the next day. Great service. My wife is happy!
took out the old racks, disassembled the top blade and put on new top rack and put new bottom rack in!easy
ordered new racks and replaced.. very easy way to order..prompt delivery. made my wife very happy..great xmas present..haha
I opened the boxes (which arrived VERY quickly! thank you) and exchanged the old racks with the new racks. The upper rack had to be re-fitted with the spinning spray mechanism, but, it was very easy to changed it from installation on the old upper rack to re-installation on the new upper rack.It was all a breeze!
Took less than 10 minutes. It took longer to order the part than install it. Great company, ordered on a Saturday, had the part on Wednesday.
I disconnected power to dishwasher. I removed six screws to gain access to door latch assembly. I removed two screws, which attached door latch to machine. I removed the 4 electrical attachments.I then attached 4 electrical attachments to the new door latch. I attached new door latch to machine with two screws. I reattached cover with 6 screws.I connected power back to the dishwasher and everything worked great.Took aprrox. 15-30 mins to compete.It only took three days to received shipment including day I made purchase. I was very pleased with my purchase.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.