http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/B8JV66IP.gif
See part 21 in the diagram

CONTROL-TEMPERATURE

PartSelect Number PS10060236

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $36.41
  • You Save

    $6.07
  • Your Price

    $30.34
In Stock
Order within the next 10 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 2 reviews What's this?
1-2 of 2
 

14 of 17 people found this instruction helpful

Parts Used

  • CONTROL-TEMPERATURE

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerWILLIAM from URBANA OH

Freezer would run then thaw then freeze. Tap on the control knob, it would start running again

Easy fix. I unplugged the freezer, unload items in freezer. took out shelves and baskets, Pulled off the control knob then removed all screws. removed inside panel, replaced part exactly as I took out old part. Put the panel back on, put everything back in place. Plugged freezer back in and turned the knob to 3. Let freezer run for a day to see if I ordered the correct part. Problem is fixed. Thank you, PartSelect for making it so easy to find, order the correct part and for all the customers input to make the repair easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

13 of 15 people found this instruction helpful

Parts Used

  • CONTROL-TEMPERATURE

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customerjohn from hurst TX

Freezer compressor ran continuously and freezer getting colder and colder.

Repair was quick and easy. I removed the frozen food in the bottom so the back panel could be removed. The temperature comtrol is attached to the back of that panel. It has a metal wire with a capillary tube on the end to sense the temperature. I just installed it exactly like the old one came out. Be sure and don't get the wires mixed up. Sometimes it helps to make notes. This was also a good time to clean the bottom out and make sure the drain hole was clear.

It took two days for the temperature to stabilize. I was anxious for a couple days that there was something else wrong. However, it smoothed out and the temperature control (thermostat) is now working properly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2