Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Frigidaire/ZFSRSJ0E.gif
See part 2 in the diagram
http://www.partselect.com/Schematics/Frigidaire/ZFSRSJ0E.gif

Ice Maker with Cover - 8 Cube

PartSelect Number PS10057209

This Frigidaire ice maker includes the ice mold and control device. The ice maker receives water from the water inlet valve and stores water in the ice mold until it freezes. Ice is automatically ejected and the process continues until the storage bucket is full. Your ice maker should be replaced if ice is not being generated, stored, dispensed, or the ice maker has been damaged. Replacing the ice maker is an easy job and only requires a 1/4 inch nut driver. Before you start this repair, make sure your refrigerator is unplugged. For help with this installation, check out the video below.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Ice maker not making ice.
  • Ice maker won’t dispense ice.

Compare At

$117.38

You Save

$19.56

Your Price

$97.82
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

165 of 222 people found this instruction helpful

Parts Used:
  • Ice Maker with Cover - 8 Cube
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Juan from Miami, FL

Broken ice maker

Unplugged faulty ice maker, removed two screws holding it to the refrigerator and took it out. Reversed the operation with the new ice maker and after a few minutes presto, we have ice.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 8 people found this instruction helpful

Parts Used:
  • Ice Maker with Cover - 8 Cube
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Dennis from DEER LODGE, MT

Ice maker stopped working

Reviewed the video on your website and followed the directions to the letter. Great video

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 6 people found this instruction helpful

Parts Used:
  • Ice Maker with Cover - 8 Cube
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Robert from SIOUX FALLS, SD

Ice maker quit working

Loosen two screws, unclip electrical connection, remove ice maker, remove l shaped leveling piece of metal from old one, put on new one. Install in reverse order. Hint.. when loosening two screws, use a mirror

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3