10056979-1-S-Whirlpool-W10672617-Flat Beater
10056979-1-S-Whirlpool-W10672617-Flat Beater 10056979-2-S-Whirlpool-W10672617-Flat Beater

Flat Beater

PartSelect Number PS10056979

This has a powder coated finish.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Touchpad does not respond.
  • Compare At

    $15.65
  • You Save

    $2.61
  • Your Price

    $13.04
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 10 reviews What's this?
1-10 of 10
 

16 of 20 people found this instruction helpful

Parts Used

  • Flat Beater

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMARILYN from St. JOseph IL

Flat beater powdercoat covering was peeling off.

I just traded the old beater for the new. It was just in time for cookie making.

Help other customers find the most helpful instructions.

Were these instructions helpful?

12 of 13 people found this instruction helpful

Parts Used

  • Flat Beater

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJennifer from Phoenix AZ

The paint on the flat beater for my electric mixer was chipping

I inherited an electric mixture from my mother-in-law after she died in 2004. The mixer must have been from the 70s. I guess I could buy a new one but I think of her each time I use it and it is almost like I keep a piece of her alive. The paint on the flat beater was chipping and instead of potentially poisoning my family I knew I needed to either replace the mixer or get a new Flat Beater. I had no idea, with the mixer being so old that a replacement part would even exist but it did! I purchased the replacement flat-beater and installed it in two seconds. Now I can use my mixer with immeasurable sentimental value and not pose any health risks to my family!

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 15 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerNancy from Indianapolis IN

Replacement of beaters

The Kitchenaide Artisan stand mixer was purchased as a floor model. The two white beaters had worn and chipped spots on them. I purchased two replacement beaters from Part Select. They arrived the next day in great shape. Have used the mixer several times since and it has worked wonderfully.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 9 people found this instruction helpful

Parts Used

  • Flat Beater

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSandra from Reynoldsburg OH

Needed a new beater since old one was chipping and had coating flaking off.

Looked up part replacement, ordered on line. Found part easily and waited anxiously for new part. I wanted to make cookies for the holiday season. Received part quickly, opened up packaging, put on mixer and I was back in business. Thanks so much for an easy fix. I also was pleasantly surprised at how cheap the replacement part was. Thank you, thank you for allowing me to get a new part with ease and continue to use my Kitchen Aid mixer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

  • Flat Beater

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJuanita from Ferndale CA

Beater was worn out

Insert and off you go. No real installation.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

  • Flat Beater

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerPat from Marshfield WI

The coating was chipping off of the original flat beater

All I had to do was insert the new beater. Wonderful timing, was just going to start some holiday baking. will definetly use your website again. Thank you.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 12 people found this instruction helpful

Parts Used

  • Flat Beater

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerterry from eudora AR

Very simple could not been a easer job thank for partsselect.

all that were required, were you take off old beater an replace new.simple push up old part an replace new. as you do after usage of the machine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Flat Beater

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJuanita from Ferndale CA

Needed new flat beater

Just replaced the beater.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Flat Beater

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customer.JENNIFER from STAR ID

Powder coating came off mixer paddle.

put new paddle on

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 9 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLaura from Alta Loma CA

New attachments

Got the right parts, very quick delivery, will use again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-10 of 10