Models
>
ZV800BJ1BB
ZV800BJ1BB General Electric Range Hood - Overview
Sections of the ZV800BJ1BB
[Viewing 1 of 1]
Manuals & Care Guides for ZV800BJ1BB
Click to downloadInstall
Installation Instructions
(1.19MB)
Install
Installation Instructions
(3.02MB)
Manual
Owner's Manuals
(0.57MB)
Manual
Owner's Manuals
(0.97MB)
Keep searches simple, eg. "belt" or "pump".
Halogen Bulb - 20W - 12V
PartSelect #: PS951718
Manufacturer #: WB01X10239
This light bulb is a 12 Volt/20 Watt bi-pin base halogen lightbulb, meaning it emits a bright, white light which is similar to natural daylight and is inserted into its socket, as opposed to being rot...
$37.02
In Stock
Questions And Answers for ZV800BJ1BB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Halogen bulb beneath microwave lighting the stovetop burned out after 9 mo.
Unscrewed the light cover beneath the microwave with a phillips head screwdriver. The bulb is very tiny and has 2 straight parallel prongs that slide into 2 small holes. Grab bulb from both sides with each hand firmly and slide STRAIGHT out (no twisting or pushing). Don't worry about breaking even though it may take a fair amount of pr
... Read more
essure to pull out. New bulb arrived within a couple of days. Due to high shipping cost, suggest buying 2 or more bulbs at once. Bulb is often used as a kitchen night light so that is probably why I only got 9 months out of it.
Read less
Parts Used:
-
Edward from Averill Park, NY
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
40 of 51 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burned out light surface light bulb
the main issue I had is the appliance manual stating that the bulb should be "unscrewed". when I first read the manual, before I received the bulb on delivery, I tried "unscrewing" the bulb, which actually is a PLUG IN bulb. small wonder that it didn't come out! luckily I didn't break the connections off in the socket!
Parts Used:
-
Veronica from St Augustine, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
10 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burnt out bulb
-
Neal from Gardena, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
13 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!