ZV1050S1FSS General Electric Range Hood - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
lights wouldn't work
Two years ago (approximately) the lights quit working. I replace the bulbs with ones from the local hardware store; didn't work; replaced fuses; didn't work; replaced circuit board, didn't work; finally, ordered expensive recommended part and replaced fuses purchased at local dealer, WORKS! The bulbs I purchased locally were 50watt not 20. I had 2 different repairmen (one GE rep) look at it,and neither one solved the problem. But it's fixed now!
Parts Used:
-
Sharon from Montgomery, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
8 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light Socket Not Working
Removed unit by removing two mounting screws attaching socket to range hood. Removed adjacent filter panel, pulled socket out through opening, and removed two screws attaching ceramic insulation base to socket. Reinstalled in reverse order.
Parts Used:
-
Tyrone from San Bernandino, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!