ZTD90DPSN1SS General Electric Range - Instructions
Sections
Parts
Questions & Answers
Symptoms
Instructions
All Instructions for the ZTD90DPSN1SS
A burnt out bulb
After opening the Oven door, I removed the glass cover to view and locate the bulb, at the inside, top front of the Oven. Removed the burnt out bulb by pulling it in a forward motion towards the front of the Oven, slid the new bulb into place and the Oven is again functional.
Parts Used:
George from PALM COAST, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
9 of 14 people
found this instruction helpful.
Thank you for voting!
oven door inside glass shattered
watched repair video on disassembling oven door and replacing glass. followed the video.
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
4 of 4 people
found this instruction helpful.
Thank you for voting!
The oven was burning when cooking at same temperature we always cooked it on
there was one screw holding it on the back wall of the oven. It was easy enough that my daughter installed it with my guidance.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
4 of 5 people
found this instruction helpful.
Thank you for voting!
The oven would not hold an even temperature.
I used a Trox bit to remove one screw, replaced the oven sensor and reinstalled the screw. The whole project took less than 5 minutes.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 3 people
found this instruction helpful.
Thank you for voting!
Oven door window
They part we received was not the right part. Called GE and ordered a new part with the same number and it worked perfectly!! Yr part was the wrong size so has to send back. Very frustrating!!!!
Parts Used:
Lona from THIEF RVR FLS, MN
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
2 of 3 people
found this instruction helpful.
Thank you for voting!
Oven meat probe broken
This item worked as described. I paid more for this 'oem' probe than the generic 1 because i didn't want to chance it not working as others have reported. - works great. tested it....snaps in, reads correctly, snaps out.
Parts Used:
robert from FAIRFIELD, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 person
found this instruction helpful.
Thank you for voting!
Temp probe was defective
Threw the old one out - plugged the new one in. Steak came out just as ordered - medium rare.
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 person
found this instruction helpful.
Thank you for voting!
Went well.
Changed the Temperature Sensor as you suggested, but the problem of 40 minutes to reach a temperature of 375 degrees F. remained the same.
Parts Used:
Salih Hindas / from SPRNGFLD GDNS, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
2 of 5 people
found this instruction helpful.
Thank you for voting!
Burnt out lamp bulb
Remove oven light lens cover, remove the bulb and replace it with a new one.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 13 people
found this instruction helpful.
Thank you for voting!
Broken Probe Sensor
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
Oven Probe broke
Ordered new probe
Parts Used:
Kathleen from Munt Laurel, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
missing meat thermistor
plug in thermistor when needed
Parts Used:
John R from Asheville, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
All Instructions for the ZTD90DPSN1SS