Models > ZSC2202NSS01

ZSC2202NSS01 General Electric Microwave - Overview

Get Parts and Repair Help for ZSC2202NSS01

If you know the microwave repair part you need, you can browse the list of all parts on the ZSC2202NSS01, or you can search by name or part description. You can also find your part by where it is located on the ZSC2202NSS01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.05

Line Fuse

Order within the next 11 hrs and your part ships today!
$18.57

Halogen Bulb - 20W - 12V

Sold Individually.

Order within the next 11 hrs and your part ships today!
$28.63

2-Terminal Micro-Switch

Also known as Interlock Switch. Appliance normally takes 2 of these. This part is used to stop the flow of electrical current when the door is opened to prevent any microwave en...

Order within the next 11 hrs and your part ships today!
$27.55

Monitor Switch

Order within the next 11 hrs and your part ships today!
$10.89

THERMOSTAT

Order within the next 11 hrs and your part ships today!
$119.16

Magnetron

This part is used to generate microwave energy/heat.

Order within the next 11 hrs and your part ships today!
$73.25

RING ASSEMBLY

Order within the next 11 hrs and your part ships today!
$71.12

Glass Cooking Tray

This tray rotates in your microwave ensuring more even temperatures.

Order within the next 11 hrs and your part ships today!
$14.95

Diode Cable

Order within the next 11 hrs and your part ships today!
$24.98

CAPACITOR HIGH VOLTAGE

Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave completely stopped working

  • Customer: Kim from Cliffside Park NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 389 of 506 people found this instruction helpful
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove an... read more

Halogen bulb beneath microwave lighting the stovetop burned out after 9 mo.

  • Customer: Edward from Averill Park NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 17 of 18 people found this instruction helpful
Unscrewed the light cover beneath the microwave with a phillips head screwdriver. The bulb is very tiny and has 2 straight parallel prongs that slide into 2 small holes. Grab bulb from both sides with each hand firmly and slide STRAIGHT out (no twisting or pushing). Don't worry about breaking even though it may take a fair amount of pressure to pull out. ... read more

Microwave would turn on and count down, but not heating and not rotate turntable. Pressing door up would occasionally start heat.

  • Customer: Michael from Ridgefield CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 17 of 23 people found this instruction helpful
First I disconnected the power and opened the door. Then I removed the top screws holding the top vent louvers, then removed the screw at the top of the touch pad. The touch pad removes by sliding up slightly then tilting top out. I unscrewed two screws holding the door latch assembly. Press the tab to remove and replace switch. Reconnect wires, reseat... read more