Models > ZSC2001FSS01

ZSC2001FSS01 General Electric Microwave - Overview

Get Parts and Repair Help for ZSC2001FSS01

If you know the microwave repair part you need, you can browse the list of all parts on the ZSC2001FSS01, or you can search by name or part description. You can also find your part by where it is located on the ZSC2001FSS01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$6.62

FUSE

$16.87

Primary Door Interlock Switch

This interlock switch is located in the door latch.

$55.30

Turntable

Also known as rotating ring assembly.

$7.68

Drawing Lamp

Also known as Light Bulb.

$93.54

TRAY, CERAMIC

$25.84

Monitor Switch

$23.27

Shaft - Turn Table

$83.07

Non-Stick Metal Tray/Pan

$24.36

Oven Cavity Temperature Cut-Out

Also known as fuse.

$90.96

Light Lens Cover

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave completely stopped working

  • Customer: Kim from Cliffside Park NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 290 of 382 people found this instruction helpful
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove an... read more

Everything seemed to work with the controls, but when you pressed start the light would come on and nothing else. The turntable and heating system would not function.

  • Customer: Keith from Bowling Green KY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 13 of 15 people found this instruction helpful
I unplugged it, removed the outer shell with torque bits and a screwdriver, drained the main capacitor, and began debugging the circuit with my fluke multimeter, found the bad primary interlock, googled the part number, ordered the part, received it in 2 days, replaced the interlock in about 2 minutes, and put the cover back on. Fixed. Saved me about $200 ... read more

I diagnosed the problem incorrectly: based on a previous repair.

  • Customer: Ralph from Brandon FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 24 of 52 people found this instruction helpful
The old fuse is perfectly good. The new ones arrived within a day. read more