Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ZSC2000CBB03

ZSC2000CBB03 General Electric Microwave - Overview

Get Parts and Repair Help for ZSC2000CBB03

If you know the microwave repair part you need, you can browse the list of all parts on the ZSC2000CBB03, or you can search by name or part description. You can also find your part by where it is located on the ZSC2000CBB03 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$10.70

Line Fuse

$19.57

Primary Door Interlock Switch

This interlock switch is located in the door latch.

$27.78

Monitor Switch

$58.49

Turntable

Also known as rotating ring assembly.

$100.46

Cooking Tray

NOTE: This is a manufacturer substitution. Part may differ in appearance and size but is a functional equivalent to prior part.This tray rotates in your microwave ensuring more eve...

$88.56

Non-Stick Metal Tray/Pan

$24.99

Shaft - Turn Table

$26.74

Oven Cavity Temperature Cut-Out

Also known as fuse.

$99.98

Light Lens Cover

$61.39

MOTOR TURNTABLE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave completely stopped working

  • Customer: Kim from Cliffside Park, NJ
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 617 of 822 people found this instruction helpful
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove an... read more

I diagnosed the problem incorrectly: based on a previous repair.

  • Customer: Ralph from Brandon, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 47 of 106 people found this instruction helpful
The old fuse is perfectly good. The new ones arrived within a day. read more

Microwave runs with the door open

  • Customer: Thomas from Andover, NJ
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 19 of 26 people found this instruction helpful
Remove microwave outer cover. Turn on side & locate the upper & lower door switches. Better to replace in pairs even if one is ok. Remove the wire harness to each switch. Then replace switch and re connect the wire harness. Re attach outer cover
and test to see if that solved the problem. If so then well done!! read more