Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ZSC1202NSS01

ZSC1202NSS01 General Electric Microwave - Overview

Get Parts and Repair Help for ZSC1202NSS01

If you know the microwave repair part you need, you can browse the list of all parts on the ZSC1202NSS01, or you can search by name or part description. You can also find your part by where it is located on the ZSC1202NSS01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for ZSC1202NSS01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.40

Halogen Light Bulb - 120V 20W

Sold individually.

$10.70

Line Fuse

$28.95

2-Terminal Micro-Switch

Also known as Interlock Switch. Appliance normally takes 2 of these. This part is used to stop the flow of electrical current when the door is opened to prevent any microwave en...

$71.07

Glass Cooking Tray

This tray rotates in your microwave ensuring more even temperatures.

$27.86

Monitor Switch

$12.47

THERMOSTAT

This part will trip once the inside of the cavity overheats and exceeds the recommended temperature.

$16.43

Diode Cable

$96.82

MAGNETRON

This part is used to generate microwave energy/heat.

$58.61

Turntable Guide with Rollers

This roller guide sits underneath the glass turntable tray.

$25.26

CAPACITOR HIGH VOLTAGE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave completely stopped working

  • Customer: Kim from Cliffside Park, NJ
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 594 of 787 people found this instruction helpful
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove an... read more

Under the vent light bulbs needed to be replaced

  • Customer: Robert from Naples, ME
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 49 of 66 people found this instruction helpful
Turned of f the circuit breaker to the microwave. Unscrewed the cover (1 screw!) popped out the old bulbs and plugged in the new ones, using the bubblewrap as a handle to be sure my skin didn't touch the light bulbs so the oil from my hands didn't damage or shorten the life of the new bulbs. Turned the circuit back on. That's it! read more

No power to microwave, no heating.

  • Customer: Michael from Coulterville, CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 38 of 63 people found this instruction helpful
Unpluged power cord!! Removed front control panel to expose electronics (need to remove top horizontal vent cover to expose mounting hardware). Unplugged leads to control panel board. Removed magnetron with Tstat (3- phillip heads, need stubby). Installed new parts and control panel, plugged it in tested. Done. read more