Models > ZRRSC8050E (P1130671N E)

ZRRSC8050E (P1130671N E) Maytag - Overview

Get Parts and Repair Help for ZRRSC8050E

If you know the repair part you need, you can browse the list of all parts on the ZRRSC8050E, or you can search by name or part description. You can also find your part by where it is located on the ZRRSC8050E by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your . We’ve also included any installation videos we have for ZRRSC8050E parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$8.71

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

$18.07

2 Piece Broiler Pan

$8.96

Drip Bowl - 6" - Black

$8.55

Drip Bowl - 8" - Black

Sold individually.

$57.89

Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

$38.95

Surface Infinite Switch

$27.77

Hinge Kit - Right Side

$10.48

Main Power Terminal Block

$3.84

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Getting F 1 and 2 error codes and the oven turned itself off.

  • Customer: Suzanne from Acton MA
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 44 of 86 people found this instruction helpful
Really easy but in this model there are 2 versions of the sensor, male and female. The website didn't have any place to see that. So the first sensor that came was male but we needed the other. After calling they sent me a return form and sent the new part (which was actually much cheaper) overnight and it went in very quickly. Would check this out again wh... read more

The oven control unit died. This was the 3rd time, fortunately I had an extended waranty on the first 2, as it is not a cheap item.

  • Customer: Michael from Binghamton NY
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 10 of 13 people found this instruction helpful
First turn off the electric breaker, and if necessary mark it or lock it so it will not be turned on while working on the unit.
I raised the glass stove top (it is hinged in the back), and propped it up with a piece of wood.
Removing the control requires the removal of a metal shield along with several mounting screws.
several wires needed to ... read more

Cracked inside glass window of oven door

  • Customer: Uday from Ann Arbor MI
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 7 of 7 people found this instruction helpful
1. Slide the Oven door out of its hinges after removing the screws - see Owner's manual.
2. Place door on floor with the inside face on the floor.
3. Remove screws on side and bottom of door and the lift away the side stamped pieces.
4. Remove screws as they becom visible and lift away the pieces till you reach the inside glass.

R... read more