Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
Below is a list of all parts for the General Electric Refrigerator ZISW48DWA. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
Replacement icemaker kit - electronic. This kit includes a 4 pin round plug-in connector, 6 post plug-in connector, tube and fill cup.
This part mounts in the ice dispenser.
**** The crank no longer comes with this part. You can use original crank. The crank is sold separately depending on model number of appliance.
This valve comes with 1/4" compression inlet.
NOTE: This part comes with new quick connections. To install - cut retaining nuts off of existing plastic water lines and gently push...
This defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, an...
It is used with those refrigerators that have an ice and water dispenser in the door.
This white dispenser grill is located at the bottom of the ice/water dispenser.
Note: This part is now ONLY available in black.
This auger and bucket assembly is used on 25 cubic feet and 27 cubic feet side by side models.
Found at the end of the auger in the ice container - replace when the icemaker doesn't dispense ice.
This fill tube grommet is used on the icemaker.
This part comes with 3 round pin connection terminals.
This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.