Models > ZISW48DCB > Parts

ZISW48DCB General Electric Refrigerator - Parts

All parts for the General Electric Refrigerator ZISW48DCB

Below is a list of all parts for the General Electric Refrigerator ZISW48DCB. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ZISW48DCB
1-14 of 338
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Dispenser Door Assembly or Flapper

This part mounts in the ice dispenser. **** The crank no longer comes with this part. You can use original crank. The crank is sold separately depending on model number of appli...


Ice Maker

Replacement icemaker kit - electronic. This kit includes a 4 pin round plug-in connector, 6 post plug-in connector, tube and fill cup.




Defrost Timer - 120V 60Hz

This defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, and the label is orange.


Crushed/Cubed Ice Solenoid Kit

This kit includes 1 cube solenoid, 1 armature, 2 tooth washers and 2 1/4 hex head screws.


Auger and Ice Bucket Assembly

This auger and bucket assembly is used on 25 cubic feet and 27 cubic feet side by side models.


Dispenser Control Board - 2 Slide Switches

It is used with those refrigerators that have an ice and water dispenser in the door.


Water Valve and Bracket Assembly

This water valve assembly has been redesigned. It has a new quick connect style valve. To install: Cut original plastic nuts off tubing and gently push into valve until they stop. No other nuts or connectors needed.


Actuator Pad

Note: This part is now ONLY available in black.


Primary Water Inlet Valve

This part has one port and 2 solenoids and comes with a mounting bracket. The water valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold.


Ice Dispensing Drive Cup

Found at the end of the auger in the ice container - replace when the icemaker doesn't dispense ice.


Ice Bucket Auger

When activated, the auger rotates and pushes ice out of the bin through the chute to the user.



This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

Dispenser Grille

This white dispenser grill is located at the bottom of the ice/water dispenser.

All Parts for the ZISW48DCB
1-14 of 338