ZISW480DRG General Electric Refrigerator - Instructions

I tried to follow the video...it looked easy enough to do and would have been if the trim came off! I had to go to the reviewer who said to undo the 3 springs under the keypad (found on the white part behind the touchpad). I just took an eyeglass screwdriver and pushed up...it was easy to follow the solenoid installation video from there! If I can do it...anyone can! I'm a 65year old female.

followed you online video and it was easy and simple repair only took about an hour frig is back quiet and working fine thanks also parts come fast

Removed old ice maker, then screwed in new ice maker. Only thing that was a little difficult was to hold the auger motor, while trying to unplug the clipped in plug on the old ice maker. I could have used an extra pair of hands.

As per Youtube video

Watched the video, did exactly as it showed.

unplugged appl. removed valve assembly and removed electodes (?) and water hoses(tubes). replaced hoses & electrodes to new assembly and re-attatched new assembly to refrigerator. plugged appl. back in and turned water on. NO LEAKS. woo hoo. Thanks for the part.

The repair might have gone more smoothly had I received the correct parts. Evaporator fan grommets were ordered, light bulbs were received... Changing the water valve went smoothly and was quite easy.

Had to take front panel off dispenser area. Then remove components and install new part. That was easy part. Problem was getting components back into front of freezer. Seemed like something was blocking it from going all the way in. Had to remove small amount of insulation and "jiggle" components and eventually fell into place.

The first thing I did before starting the repair was watch the 2 videos. I followed the directions step by step and within an hour I had a functioning ice maker again. I had searched all over the web and the other sites were of no help. Your site really made it easy to figure out the problem and order the right parts. I now have a problem with my dishwasher so I will be back on your site soon. Thanks!

Followed the repair video, was spot on!!

Removed the faulty ice maker in about two min.. New unit was installed in approx. five min. Watched your video prior to installation and it helped greatly.

Video and instructions were very thorough, but on my paticular freezer, the inside door shelves had to be removed (30 screws) to get to the face place to release the door controls. Newer models can be accessed from the front. After removing front cover, repairs were very simple. Found that the solenoid was "rusted" and would not function. Easy replacement. Order new flapper, but was not needed (have a spare now...haha). When putting back together, the door did not seal at top...had to adjust how I tightened screws (pattern - top to bottom) to keep door from "warping". Did not think that the small amount of torque on the screws could "warp" a door so easily. After re-torqueing the screws, moved the top hinge just a little and door again sealed correctly. Will keep this site "bookmarked" for all my future appliance needs. Never had customer service so thorough. Amazing that I order about 5:00 pm on a Thursday and parts were at my door just after lunch on Friday...amazing service. Thanks for the instructions, video and CS.

Just removed the filter and used my hand to attach the water filter bypass cap....did not even need to turn off the water first.

Watch the video

used a flat screwdriver to pop off out side cover then remove 6 screws took off plate. Pulled off the flapper and replaced. less the 15 mins and fixed the issue