Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
If you placed an order on ApplianceHelp.com the order is still valid and you can check on its status and make changes here on PartSelect.com. Click here for more details.
Below is a list of all parts for the General Electric Refrigerator ZISW42DXA - Refrigerator. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This part mounts in the ice dispenser.
**** The crank no longer comes with this part. You can use original crank. The crank is sold separately depending on model number of appli...
Replacement icemaker kit - electronic. This kit includes a 4 pin round plug-in connector, 6 post plug-in connector, tube and fill cup.
This valve comes with 1/4" compression inlet.
NOTE: This part comes with new quick connections. To install - cut retaining nuts off of existing plastic water lines and gently push...
This defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, an...
It is used with those refrigerators that have an ice and water dispenser in the door.
This auger and bucket assembly is used on 25 cubic feet and 27 cubic feet side by side models.
This solenoid and arm assembly is for the cube/crushed ice.
The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
Found at the end of the auger in the ice container - replace when the icemaker doesn't dispense ice.
This white dispenser grill is located at the bottom of the ice/water dispenser.
This kit is used on the water/ice dispenser door. This part allows water/ice to be dispensed on demand.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.