Below is a list of all parts for the General Electric Refrigerator ZISB42DCA. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This part mounts in the ice dispenser.
**** The crank no longer comes with this part. You can use original crank. The crank is sold separately depending on model number of appli...
Replacement icemaker kit - electronic. This kit includes a 4 pin round plug-in connector, 6 post plug-in connector, tube and fill cup.
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
This defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, an...
This kit includes 1 cube solenoid, 1 armature, 2 tooth washers and 2 1/4 hex head screws.
It is used with those refrigerators that have an ice and water dispenser in the door.
This auger and bucket assembly is used on 25 cubic feet and 27 cubic feet side by side models.
Note: This part is now ONLY available in black.
This water valve assembly has been redesigned. It has a new quick connect style valve. To install: Cut original plastic nuts off tubing and gently push into valve until they stop. No other nuts or connectors needed.
Found at the end of the auger in the ice container - replace when the icemaker doesn't dispense ice.
This fill tube grommet is used on the icemaker.
This part has one port and 2 solenoids and comes with a mounting bracket. The water valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energ...
When activated, the auger rotates and pushes ice out of the bin through the chute to the user.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.