Models > ZIS360NMA

ZIS360NMA General Electric Refrigerator - Overview

Get Parts and Repair Help for ZIS360NMA

If you know the refrigerator repair part you need, you can browse the list of all parts on the ZIS360NMA, or you can search by name or part description. You can also find your part by where it is located on the ZIS360NMA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for ZIS360NMA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$9.20

Temperature Sensor

Also known as Thermistor. This part is used to sense the temperature in the cabinet.

$62.79

Ice and Water Filter

Sold individually. NOTE: As per the manufacture this is an updated water filter. If you have never installed the updated filter or your old filter was made by Culligan, you may need the adapter to install the filter. GE Refrigerator Water Filter. If you have never installed this new style filter or your old filter was made by Culligan you may need the adapter to install it.

$144.30

Ice Maker

Replacement icemaker kit - electronic. This kit includes a 4 pin round plug-in connector, 6 post plug-in connector, tube and fill cup.

$2.14

Evaporator Fan Grommet - Red

$49.23

Evaporator Fan Motor

Note: Thermistor is NOT included. If you need the motor with the thermistor, see related parts. This evaporator fan motor is located in the back of the freezer, and circulates ...

$19.55

Single Outlet Valve Kit

This single outlet valve has 1/4 inch compression fittings, and is intended for use with refrigerators that have ice makers that make crescent shaped ice cubes. NOTE: As per the manufacturer this valve has new quick connection. You must cut retaining nut off of the current plastic water line and gently push it into new valve. To remove, depress ring that the tube slides into.

$1.70

Lid Bumper

$33.70

Light Switch

$13.46

Water Filter Bypass Cap

$17.52

Halogen Bulb - 20W - 12V

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replace water filter

  • Customer: Alfred from Novato CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 165 of 246 people found this instruction helpful
Unscrew old filter and remove(counterclockwise). Line up arrow on new filter with arrow on connection housing. Turn clockwise till resistance met. Do not overtighten. Follow directions. Simple. read more

my refigerator was warm but the freezer was cold and working correcttly

  • Customer: michele from North Smithfield RI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 93 of 110 people found this instruction helpful
I went to a GE repair center to explain my problem, the service center reccomended that I have a techinician come out o look at it. $75.00 for the visit and what ever labor and materials wuld cost.

I went on line to see if there were others having this same problem and found that there were many with the same problem.

After reading som... read more

Evaporator motor sounded like wind in the trees howling

  • Customer: DOUG from MARYSVILLE OH
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 53 of 57 people found this instruction helpful
I had to remove all of the shelves.....part of the ice maker.....the rear cover over the freezer coils.....There were two wires that came from the back of the freezer that were also incorporated with the fan motor plug from the factory....This caused me to cut all of the wires from the new motor and soider them to the existing plug and shrink wrap the connec... read more