Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ZIBI240PAII

ZIBI240PAII General Electric Wine and Beverage Cooler - Overview

Get Parts and Repair Help for ZIBI240PAII

If you know the wine and beverage cooler repair part you need, you can browse the list of all parts on the ZIBI240PAII, or you can search by name or part description. You can also find your part by where it is located on the ZIBI240PAII by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wine and beverage cooler. We’ve also included any installation videos we have for ZIBI240PAII parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$155.85

Ice Maker

This is a replacement ice maker kit, it is used in the freezer section of your refrigerator. This particular model will produce seven round or crescent shaped cubes every cycle. Th...

$4.46

Fill Tube Clamp

The fill tube clamp is used in refrigerators to support the water tube. If the tubing or hose is working but is loose inside the unit, the clamp could be broken or damaged. If this is an issue your refrigerator is experiencing, replacing the clamp can be the solution. These tube clamps are sold individually and the screw is not included. Make sure to unplug your refrigerator from the power source before installing this part. Refer to the manual provided by the manufacturer for further instructions on this repair.

$100.84

DRYER

$124.20

GLASS SHELF

$392.42

Refrigerator Power Supply Board

$92.25

RELAY START

$11.48

BULB 120V 15W

$42.72

BADGE MONOGRAM SMALL

$109.47

MAGNETIC GASKET

$166.17

Water Valve

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

ice stalactites were drooling out of the icemaker and gumming up the cubes in the receiving tray.

  • Customer: Gerald from Benicia, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 66 of 85 people found this instruction helpful
I first shut off water flow to the fridge. Examination of the package (which was not exact in appearance to the original) demonstrated that the electrical connectors were well-insulated so I arrogantly and successfully proceded without disconnecting the power. My fridge is old enough that the model doesn't appear exactly on anyone's list so I wasn't alarmed... read more

Ice maker stopped working

  • Customer: Dan from West Bloomfield, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 62 of 76 people found this instruction helpful
I unplugged the electrical connection. Then I removed the 2 screws holding the icemaker in place. I lifted out the old icemaker unit and put the new one in place. Then put the 2 screws back in and plugged in the new unit.

The icemaker started making ice very soon after turning the unit on. read more

broken ice maker part

  • Customer: Laura Beth from Mandeville, LA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 60 of 79 people found this instruction helpful
used a screwdriver to remove screw and unplugged part. Plugged in new one and secured with a screw.
Simple read more