Models > ZGU48N6RH5SS > Instructions

ZGU48N6RH5SS General Electric Range - Instructions

All installation instructions for ZGU48N6RH5SS parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the ZGU48N6RH5SS
1-4 of 4
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

old switch would not turn off

  • Customer: NORMAN from THOMSON GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 5 of 6 people found this instruction helpful
remove c clip, remove two wires
install new switch,
replace c clip, replace two wires
test
have a cup of coffee

inability of igniter to shut off

  • Customer: Darren from Redondo Beach CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed cover, removed clip and exchanged part

insert burner is broken

  • Customer: sherry from Raleigh NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
replace insert burner

Broken gas line & missing cap

  • Customer: Frank from Jacksonville FL
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Front control panel must be removed but left hanging on wires, remove kick panel at base of stove, locate and remove all screws that attach side of stove (either side) when all screws have been removed from side panel you can lift up about an inch and remove side panel thus giving you access to base of burners and attached gas lines; after replacing gas line i recharged the lines with gas and checked for leakage by using a grill lighter, (no leaks?) i re-installed the side panel, this was the most difficult part of the repair because the side panel must be properly placed and lined up
All Instructions for the ZGU48N6RH5SS
1-4 of 4