Models > ZGU36KBK2BB

ZGU36KBK2BB General Electric Cooktop - Overview

Get Parts and Repair Help for ZGU36KBK2BB

If you know the cooktop repair part you need, you can browse the list of all parts on the ZGU36KBK2BB, or you can search by name or part description. You can also find your part by where it is located on the ZGU36KBK2BB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ZGU36KBK2BB [Viewing 2 of 2]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$1.68

Grate Foot

Sold individually. The grate foot is located under the grate to protect the stove top.

Order within the next 2 mins and your part ships today!
$3.00

CLIP ELECTRODE

Sold individually.

Order within the next 2 mins and your part ships today!
$6.62

Control Knob Seal

Sold individually. This seal prevents any leaks from getting under the cooktop or into the switch area.

$4.05

Burner Gasket

Order within the next 2 mins and your part ships today!
$1.93

Screw

This screw is sold individually.

Order within the next 2 mins and your part ships today!
$32.89

Spark Igniter Switch and Harness Assembly

Order within the next 2 mins and your part ships today!
$2.79

Screw

Sold Individually.

Order within the next 2 mins and your part ships today!
$5.13

SCREW 6-32 MCH FHT15 984

Order within the next 2 mins and your part ships today!
$4.29

Burner Gasket

Order within the next 2 mins and your part ships today!
$59.14

Spark Module - (0+6)

Order within the next 2 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Grate Foot had worn out

  • Customer: Kathryn from Star City AR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 11 of 14 people found this instruction helpful
A rubber grate foot on my range top had worn out. I pulled the worn foot out and installed the new grate foot with no tools or accessories. Good as new! Now I don't have to worry about the grate scraping my range top and scratching the paint. I also ordered extras so I won't have to wait if another wears out. read more

feet keep falling off

  • Customer: Richard from Stratham NH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
Inserted the grate foot into the spot provided; after consulting the parts manuel to insure I was using the proper procedure.

I do use silicone to help hold the foot but it still won't hold read more

burner would not light because spark was skiping to ground elsewhere

  • Customer: David A from Spring TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 2 of 3 people found this instruction helpful
First I removed two screws holding head in place and carefully lifted assembly up using flat screwdriver. I separated old igniter from feed wire with gentle pull. I reversed assembly after cleaning old gasket residue. torque screws back in place after cleaning with small ss wire brsh in dremel tool. Tighten in steps to firm light touch. I used new g... read more