Models > ZEW145V1SS

ZEW145V1SS General Electric Range - Overview

Get Parts and Repair Help for ZEW145V1SS

If you know the range repair part you need, you can browse the list of all parts on the ZEW145V1SS, or you can search by name or part description. You can also find your part by where it is located on the ZEW145V1SS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ZEW145V1SS [Viewing 1 of 1]

$22.41

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$8.17

T-WASHER RUB

$110.04

Infinite Burner Switch

Sold Individually. Order quantity required.

DISCONTINUED

$162.73

RADIANT HEATER

$20.83

SKIRT KNOB

GLASS PANEL & TOP S.A

$4.27

SPRING

$347.25

1800W HALOGEN BURNER

$64.07

JOINER ENDCAP

Common Symptoms of the ZEW145V1SS [Viewing 1 of 225]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Large burner would operate on high setting only.

  • Customer: Ernest from Bellevue NE
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set
  • 10 of 12 people found this instruction helpful
1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel. read more

Burner wouldn't operate

  • Customer: Linda from Hindman KY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 3 of 5 people found this instruction helpful
Took Switch panel off range. Disconnected Infinite switch. Reinstalled infinite switch.. Replaced panel. Repair was very simple and self explainatory.
Knott County Housing Authority Maintenance Personnel read more

Right front burner out.

  • Customer: Larry from Prairie Village KS
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 3 of 6 people found this instruction helpful
Ever the optimist, I'd replaced the burner on this relic of another time to no effect. That left the switch. You guys should know that when a burner element goes bad it can take out the switch. I should have put a meter on it. Wehn I looked for a replacement a few months ago there were still factory parts available, but they were $80 or so and I wasn't incli... read more