Models > ZEU36KWK1WW

ZEU36KWK1WW General Electric Range - Overview

Get Parts and Repair Help for ZEU36KWK1WW

If you know the range repair part you need, you can browse the list of all parts on the ZEU36KWK1WW, or you can search by name or part description. You can also find your part by where it is located on the ZEU36KWK1WW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ZEU36KWK1WW [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$27.12

Infinite Control Switch

$2.36

Single Screw Only

Sold Individually.

$49.55

Dual Burner Control Switch

This switch controls the dual burner.

$16.02

Foam Rubber Tape

$1.70

Screw

This screw is sold individually.

$3.00

WASHER

$2.79

SCREW-10AB

$3.62

Secure Down Bracket

$2.36

SCREW-BLACK

$26.70

Tape

This roll contains 108 inches of tape.

Common Symptoms of the ZEU36KWK1WW [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Switch failed

  • Customer: John from Fresno CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 12 of 16 people found this instruction helpful
I turned off the circuit breaker and tested the cook top. I pulled the cook top out and laid a piece of plywood over the opening to work on the cook top and not scratch the granite counter top. The mistake I made was to turn the cook top upside down and separate the top from the housing. The dampening springs came off the burners and I could have damaged ... read more

Electric range burner not working due to control switch

  • Customer: Rodney from Erath LA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 10 of 15 people found this instruction helpful
Turned off power to counter top range and pulled-up from counter. Set range on counter and removed 16 screws from around the housing allowing me to pull-up and remove range top. Used socket to remove 4 screws holding control switch bracket in place and 2 screws holding bad switch in place. Disconnect wires from bad switch and reconnected to new switch. Place... read more

No control of right front burner (dual burner)

  • Customer: Jeff from Clinton IA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench(Adjustable)
  • 7 of 9 people found this instruction helpful
The burner would work but you could not regulate the heat. I ordered and replaced the control switch for that burner. The part was like for like and reasonably priced compared to other websites and dealer. The picture showed that it was identical. I ordered one day and it was here the next. I had drawn a diagram of where the wires went on the old switch so i... read more