Models > ZEU304B1WG

ZEU304B1WG General Electric Range - Overview

Get Parts and Repair Help for ZEU304B1WG

If you know the range repair part you need, you can browse the list of all parts on the ZEU304B1WG, or you can search by name or part description. You can also find your part by where it is located on the ZEU304B1WG by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ZEU304B1WG [Viewing 1 of 1]

$16.02

Foam Rubber Tape

$8.17

"SCREW THUMB 10-24X2 0""

$6.24

Razor Scraper

This is sometimes used to clean glass stovetops.

$92.27

Large Dual Element - 2500W

This dual element can be changed to be used as either a small or large burner. It comes with the element limit switch.

$319.42

Dual Haliant Element with Bridge

$7.68

CLEANER

$15.16

CLIP RETAINER

$4.27

SPRING

$594.14

BOARD POWER

$555.91

BOARD CONTROL

Common Symptoms of the ZEU304B1WG [Viewing 1 of 13]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Right front heating element was not working

  • Customer: Eugene from Hilton Head SC
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench(Adjustable)
  • 4 of 8 people found this instruction helpful
First removed the back of range, then the metal vent section that prevented the range top from lifting up. There are 2 screws accessable only after you open the oven door that need to be removed before you can lift up the glass top. Then remove the bracket holding the 2 front heating elements. Made a diagram of all wires going to and from the large 2 eleme... read more

Outer element not working

  • Customer: Richard from Hampton NH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Cooktop lifted out without the need to remove any fastening of any kind. Slid two 2X2 sticks under top to have access to screws around perimeter. After removing all screws I lifted the glass top from base. I did all of this before I placed the order to make sure that I was ordering the correct element. Good thing that I did that because there are two similar... read more

Cooktop double burner quit heating.

  • Customer: Patti from Fort Collins CO
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
We never could figure out how to get the glass top removed to replace the burner. Looked at several instuctional videos and they never wrong in their description of where the 2 screws were to remove it. We finally called Sears Repair. They came out the next day and fixed the problem. The scres were on the side of the stove unit, not under the oven door. Oh... read more