Models > ZEM200WV01

ZEM200WV01 General Electric Microwave - Overview

Get Parts and Repair Help for ZEM200WV01

If you know the microwave repair part you need, you can browse the list of all parts on the ZEM200WV01, or you can search by name or part description. You can also find your part by where it is located on the ZEM200WV01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ZEM200WV01 [Viewing 1 of 1]

$19.43

Secondary Door Switch

$110.00

Rectangle Glass Tray

$5.55

Ceramic Fuse - 15 Amp

$2.79

Spring - Button

$63.21

High Voltage Diode

This diode has a 1/4" female connection and an eyelet.

$2.42

PIN FOOT

FOOT

$93.46

SENSOR HUMIDITY

$204.80

Magnetron

This part is used to generate microwave energy/heat.

SOCKET-LAMP

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up

  • Customer: Marla from Arlington TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 81 of 100 people found this instruction helpful
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the ... read more

Turntable won't move, no heat -but light and fan ok.

  • Customer: Sean from San Jose CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 18 of 21 people found this instruction helpful
Remove the 2 Torx-15 screws at left of control panel. Work the control panel out by pulling slightly to the left first - it is engaged to the slotted holes to the right.

Remove the door's upper switch by lifting the tab and pulling out the switch carefully. To install the new switch, you may have to remove 2 philips screws holding the plastic asse... read more

All electircal functions worked except the heating mechanism

  • Customer: Chad from Firestone CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 13 of 15 people found this instruction helpful
A great place to start is to reveiw the posting from "Marla From Arlington TX" posted on 8-3-09. It provides an excellent description of the process that you will need to follow. The only additional thing that I would add is to check the contacts on the switches. In my case I found that all three of the switches had a small build-up of corrosion. I used ... read more