Models > ZEM200SF02

ZEM200SF02 General Electric Microwave - Overview

Get Parts and Repair Help for ZEM200SF02

If you know the microwave repair part you need, you can browse the list of all parts on the ZEM200SF02, or you can search by name or part description. You can also find your part by where it is located on the ZEM200SF02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ZEM200SF02

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$21.87

Secondary Door Switch

$70.09

Cooking Tray

This glass tray rotates in your microwave ensuring more even temperatures.

$20.10

Monitor Door Switch

$36.97

Diode

This part allows power to go one way only.

$38.77

Turntable Guide with Rollers

This roller guide sits underneath the glass turntable tray.

$19.19

Oven Cavity Thermal Cut Out

Also known as a Sensor or Fuse. This part will trip once the inside of the cavity overheats and exceeds the recommended temperature.

$65.85

Capacitor

The capacitor is an electric circuit element that is used to store charge temporarily.

$22.57

Under The Cabinet Mounting Kit

This kit comes with all pieces necessary for mounting the microwave.

$19.05

Thermostat

$14.75

DOOR-FILM

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave Cooking Tray Missing

  • Customer: Chris from Elmhurst, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 520 of 584 people found this instruction helpful
I ordered a microwave cooking tray from PartSelect; userfriendly site; and within two days, my part was delievered and easily installed. Thank you PartSelect! read more

Broken oven tray

  • Customer: Scott from Atlanta, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 439 of 517 people found this instruction helpful
replace new tray with no tools needed read more

light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up

  • Customer: Marla from Arlington, TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 176 of 204 people found this instruction helpful
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the ... read more