Models > ZEM200BF01

ZEM200BF01 General Electric Microwave - Overview

Get Parts and Repair Help for ZEM200BF01

If you know the microwave repair part you need, you can browse the list of all parts on the ZEM200BF01, or you can search by name or part description. You can also find your part by where it is located on the ZEM200BF01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ZEM200BF01 [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$60.23

Cooking Tray

This glass tray rotates in your microwave ensuring more even temperatures.

$19.43

Secondary Door Switch

$37.57

Turntable Guide with Rollers

This roller guide sits underneath the glass turntable tray

$33.11

Diode

This part allows power to go one way only.

$17.73

Monitor Door Switch

$18.16

Oven Cavity Thermal Cut Out

Also known as a Sensor or Fuse. This part will trip once the inside of the cavity overheats and exceeds the recommended temperature.

$35.04

Turntable Drive Motor

$27.77

COUPLER

$22.08

Under The Cabinet Mounting Kit

This kit comes with all pieces necessary for mounting the microwave.

$59.14

Capacitor

The capacitor is an electric circuit element that is used to store charge temporarily.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken oven tray

  • Customer: Scott from Atlanta GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 361 of 363 people found this instruction helpful
replace new tray with no tools needed read more

cooking tray brook

  • Customer: Giuseppe from Elmwood Park IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 61 of 62 people found this instruction helpful
none read more

light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up

  • Customer: Marla from Arlington TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 62 of 73 people found this instruction helpful
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the ... read more