Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brian L - January 6, 2024
Verified Purchase
Broiler element
The broiler element arrived as scheduled, fit and heated perfectly. Very satisfied.
★★★★★
★★★★★
Neil S - August 14, 2023
Verified Purchase
Easier than I thought
Part was perfect! Exactly what I needed even if I hadn't known what I needed.
★★★★★
★★★★★
Willie M - May 14, 2020
Verified Purchase
PS1020995 Broil Elelment
Part works fine it did take longer than esitmated to arrive in california but so far so good works fine.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
August 27, 2019
I ran the self cleaning function of the oven on Sunday morning. That evening when I went to use the oven, the temperature would not rise above 100 degrees. Could the problem be the broil element?
For model number ZEK938SF2SS
Hi Susan,
Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If the sensor checks out fine, you will need to check the both the broil and bake elements, the electronic control board, the terminal block and the wiring between the parts to see which one is causing the issue. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
