Models > ZEK938BF6BB

ZEK938BF6BB General Electric Range - Overview

Get Parts and Repair Help for ZEK938BF6BB

If you know the range repair part you need, you can browse the list of all parts on the ZEK938BF6BB, or you can search by name or part description. You can also find your part by where it is located on the ZEK938BF6BB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$12.82

Oven Sensor

This sensor detects the temperature within the oven cavity.

$1.70

Screw

This screw is sold individually.

$2.36

Single Screw Only

Sold Individually.

$16.87

Broiler Pan - Large

Includes the pan and grate.

$8.98

Halogen Lamp - 35 Watt

$23.05

Door Light Switch

$2.79

Screw

Sold Individually.

$12.38

SCREW-PKG 12

$2.79

Screw

This screw is sold individually. Size 8-18 x 3/4

$95.68

Upper Cooling Fan Motor with Blade

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven would go in to a F2 Error

  • Customer: Peter from stamford CT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 35 of 48 people found this instruction helpful
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function. read more

My light switch housing broke, making the oven light stay on all the time.

  • Customer: Frederick from Lovettsville VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 18 of 24 people found this instruction helpful
Most important: Unplug or turn off the breaker before beginning! (I briefly saw sparks as I removed the old switch.) Look at the replacement switch. The springs on the sides hold the switch in, which means you have to press in these springs to get the old switch out. I slipped a small screwdriver in on the side while I pulled with a small pair of pliers.... read more

Oven wouldn't preheat above 300 degrees

  • Customer: Gerald from Cape Canaveral FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 15 of 18 people found this instruction helpful
Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great. read more