Models > ZEK937BD1BB

ZEK937BD1BB General Electric Oven - Overview

Get Parts and Repair Help for ZEK937BD1BB

If you know the oven repair part you need, you can browse the list of all parts on the ZEK937BD1BB, or you can search by name or part description. You can also find your part by where it is located on the ZEK937BD1BB by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ZEK937BD1BB [Viewing 5 of 5]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Broiler Pan - Large

Includes the pan and grate.





This screw is sold individually.



Sold Individually.



Sold Individually.


Door Light Switch


Halogen Lamp - 35 Watt


Temperature Probe

This probe is used to check the internal temperature of the meat to ensure proper temperature is reached. Also known as a Meat Probe.





Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replace failed fan in control box

  • Customer: David from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Socket set
  • 19 of 20 people found this instruction helpful
After turning off the breaker to cut power to the oven, I opened the oven door and, using the PartSelect exploded diagram as a guide, I removed 3 screws from the underside of the control panel - I was then able to slide the panel up and out to remove it. Leaving all of the control wires (especially the ribbon) connected to control panel, I saw the fan assemb... read more

My light switch housing broke, making the oven light stay on all the time.

  • Customer: Frederick from Lovettsville VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 19 of 28 people found this instruction helpful
Most important: Unplug or turn off the breaker before beginning! (I briefly saw sparks as I removed the old switch.) Look at the replacement switch. The springs on the sides hold the switch in, which means you have to press in these springs to get the old switch out. I slipped a small screwdriver in on the side while I pulled with a small pair of pliers.... read more

Lots of fan noise with f2 error code when oven on

  • Customer: lloyd from lorena TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 5 of 5 people found this instruction helpful
Made triple sure electricity off. GE designed excellent access to box above oven. Remove three bolts above oven door on bottom of control panel. Slightly raise panel to take off control panel, let hang by wires. Fan in back wall behind panel and has two wires that unplug, four screws to remove. Plug in new fan, input 4 screws. Partselect excellent guide... read more