Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ZDI15CWWF

ZDI15CWWF General Electric Ice Maker - Overview

Get Parts and Repair Help for ZDI15CWWF

If you know the ice maker repair part you need, you can browse the list of all parts on the ZDI15CWWF, or you can search by name or part description. You can also find your part by where it is located on the ZDI15CWWF by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.56

1/4 Tubing Nut

This is a quarter tubing nut and is sold individually. The tubing nut works in conjunction with your refrigerator/freezer and is made entirely of plastic. The function of this part...

$13.81

Power Cord

This heavy-duty cord has a three-pronged plug (2 electrical, 1 grounding). The power cord supplies power to your refrigerator, allowing it to keep the contents inside cool. There could be an issue with your cord if you notice that the refrigerator will not turn on, or intermittently turns on and off. Check the cord for fraying, or other visible damage. If the power cord shows any signs of damage, replace the cord immediately as it could become an electrical or fire hazard. Before you begin this repair, ensure that the power is disconnected from the unit, and that all food that could ruin is stored away while the power is off.

$6.36

WATER LINE 1/4

This water line 1/4, also known as a ice maker fill tube, is used in freezers and refrigerators. The tube directs the water into the ice maker cup during the cycle in which it fill...

$370.60

Ice Cutting Grid

This ice cutting grid is located behind the ice maker door. The cutting grid consists of thin, heated metal wires that slice the slabs of ice when they slide off the evaporator plate, creating the cubes that fall into the ice bin. When the cutting grid is broken or malfunctioning, the slabs of ice could stack, and the ice production cycle stops. Replace your existing cutting grid with this OEM replacement part when you discover that the part is not working properly. Remember to ensure that the power is disconnected from your refrigerator before you begin this repair.

$88.73

THERMISTOR BIN

$43.93

CAP DRAIN

$101.05

DRYER

$202.96

COIL SOLENOD

$158.78

MOTOR CONDENSER FAN

$54.49

HOLDER SCOOP

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Missing pieces to ice machine

  • Customer: AC from Covington, LA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Screwed in the missing pieces. Very easy and quick! read more

ice maker pump and water line leaking

  • Customer: Edward from Jenks, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I replaced both the punp and water line. the website depicting the repair parts was the best i ever worked with. The parts were high quality delivered on time and easy to install. Total job cost $30 as opposed the cost of of a service man or a new refrig. read more

Failure to make ice

  • Customer: James from Baltimore, MD
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Unit was failing to make ice as a result of cutting grid fail (broken cutting wire disrupted circuit so no heating) and corresponding ice build up on cooling plate. Defective cutting grid swapped out - replacement part had superior design to OEM and was made of comparable to superior materials. Very satisfied. read more