Models > ZBD6800K10WW

ZBD6800K10WW General Electric Dishwasher - Overview

Get Parts and Repair Help for ZBD6800K10WW

If you know the dishwasher repair part you need, you can browse the list of all parts on the ZBD6800K10WW, or you can search by name or part description. You can also find your part by where it is located on the ZBD6800K10WW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for ZBD6800K10WW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$1.09

Single Wheel Axle

This axle attaches the dishwasher wheel to the rack. Wheel is not included. Sold individually.

$1.93

Lower Rack Wheel - Front or Rear

This slotted rear wheel is sold individually. It is gray in color and does not come with the attaching axle.

$16.66

Silverware Basket

$3.00

Upper Rack End Cap

This end cap is sold individually. It is the same end cap used on the right and left side, for both front and back. It attaches to the end of the upper rack slide rail, and prevents the rack from falling when being pulled out too far.

$2.14

Wheel Axle - Clip On

Sold individually. Wheel NOT included.

$43.36

Detergent Dispenser with Rinse Cap

$2.36

Tine Retainer

This dishwasher retainer connects to the removable tine.

$4.01

Rinse Aid Cap

This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.

$6.20

Check Valve Flapper

This part allows the water to flow in the drain direction only and prevents the dirty water from coming back into the tub.

$1.70

Screw 8-16 hxw 1/2 ss

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lower wheel axles worn out

  • Customer: Glen from Alpine CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 458 of 460 people found this instruction helpful
Simple repair... Great Company, quick shipping (in CA had it the next day). Quality parts, GE OEM!! And to top it off the lowest prices!! read more

My wheels would not stay on the roller rack which made me dread having to put a dish in the rack.

  • Customer: Michelle from Weddington NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 363 of 364 people found this instruction helpful
All I had to do is take out the rack, pop off the old wheels, place the new stud rollers on, then pop on the new wheels. So easy and now my dishes don't get chipped when I pull the rack out and push it back in. I wish I didn't wait so long to order new parts. read more

Lower rack began rusting and wheels broke off.

  • Customer: nathan from commerce MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 101 of 164 people found this instruction helpful
Pull old rack out, slip new one in!
One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces. read more