Models > YWFE366LVB0

YWFE366LVB0 Whirlpool Range - Overview

Get Parts and Repair Help for YWFE366LVB0

If you know the range repair part you need, you can browse the list of all parts on the YWFE366LVB0, or you can search by name or part description. You can also find your part by where it is located on the YWFE366LVB0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for YWFE366LVB0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

$2.70

Screw

This screw is sold individually.

$6.72

Rear Drawer Glide

$67.62

Sensor

This temperature sensor detects the temperature within the oven cavity.

$39.84

Oven Rack

Sold individually.

$44.80

Broil Element

Note: This part has been updated by the manufacturer. It may differ in appearance but will still function the same as the original. This part is located on the inside of the oven on the top.

$5.74

SCREW

Sold individually.

$18.07

2 Piece Broiler Pan

The top of this part is now black.

$5.05

Touch-Up Paint - White

18ml

$36.41

Infinite Control Switch - 6"

This switch controls the stove top surface burner.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

temperature not accurate after 3 1/2 years of happy usage

  • Customer: Ruth from Oregon IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 63 of 119 people found this instruction helpful
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.

The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I tur... read more

Replace shattered outer door glass

  • Customer: Philip from Vandalia MI
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 29 of 36 people found this instruction helpful
This is not the best design. You'll need to have an extra set of hands to hold the trim pieces in place. Remember the glass is positioned outside [on top of]the trim pieces. Be careful as the trim pieces are rather brittle and can be hard to locate in their proper position. Position glass in the holding tabs at the bottom, hold glass against the trim piece... read more

mice had made nests in the insulation wrap in the range

  • Customer: Wendy from Red Hook NY
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 18 of 18 people found this instruction helpful
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told m... read more