Quick Question!

Have you ever purchased from PartSelect.com before?

Models > YSF377PEGQ7

YSF377PEGQ7 Whirlpool Range - Overview

Get Parts and Repair Help for YSF377PEGQ7

If you know the range repair part you need, you can browse the list of all parts on the YSF377PEGQ7, or you can search by name or part description. You can also find your part by where it is located on the YSF377PEGQ7 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for YSF377PEGQ7 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.60

Light Bulb - 40W

Sold individually.

$3.06

Torx Screw

7-18 x 3/4" - sold individually.

$3.06

Screw

This screw is sold individually.

$12.00

Control Knob

This knob accepts a D-shaped shaft. Sold individually.

$15.70

Surface Burner Spark Igniter

This part helps your burner ignite and produce flame.

$45.09

Oven Rack

Sold individually.

$7.36

Rear Drawer Glide

$3.06

Screw, Igniter

This screw is sold individually.

$3.06

Screw

Sold individually. Lock washers are used with screws when vibration from an appliance may cause the screw to loosen. Lock washers are also used in the electrical components of an ...

$8.37

Touch-Up Paint - White

18ml

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

oven wouldn't heat

  • Customer: Ignatius from Hazelwood, MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Wrench (Adjustable)
  • 81 of 89 people found this instruction helpful
My oven was misdiagnosed from an appliance repair company. They said my ignitors and spark module needed to be replaced. I did this myself and still nothing. The problem happened to be a defective gas valve.

First I unplugged the stove and shut off the gas supply. After I disconnected the flex hose and the 2 gas connections behind the stove, I... read more

Socket Light had a bad thread

  • Customer: Edmund from Emporium, PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 35 of 47 people found this instruction helpful
Socket Lite come with clips attached to the outside
of the housing. After you unhook the 3 lead wires
that are attached to the unit. All you have to do is push in on the clips and release the unit. Then you
snap in the new unit. Attach the 3 wire leads, put a
oven bulb in the socket end, and the install the light cover read more

mice had made nests in the insulation wrap in the range

  • Customer: Wendy from Red Hook, NY
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 29 of 32 people found this instruction helpful
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told m... read more