YMET3800TW1 Whirlpool Washer Dryer Combo - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
agitator not turning
all you have to do is watch the video, it does not get any easier then this.
Parts Used:
-
George from Wallace, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Water leaking from bottom of washer.
We search on line the possible cause for our problem and Partselect offered the possible cause and solution. We watched the video on replacing the water pump.We then ordered the pump and 2 hoses.We followed the instructions and after removing the front panel, we found out one of the pump retainer was rusted away. We tried to look for local supplier and was shock that Sears was charging 20 bucks for a single retainer, which Partselect only charge dollar and eight cents. We ordered the 2 retainers on Thursday and it arrived on Saturday afternoon. We were able to fix the problem and are very happy there was no more leak. I wish the retainers come with the pump even if you include the extra cost to the pump pricing. We could have save the extra shipping charge for ordering the retainers only. I would definitely order more parts from Partselect and recommend it to my friends. Thanks again for your help.
Parts Used:
-
BRUCE from UNION, NJ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Cogs worn noisy and unbalanced upper agitater
Removed the upper sgitster by removing the center bolt to the bottom agitater. Manage to pull the cog housing apartfor inspection. left apart and ordered the new cogs. received the cogs within 30 hours and reassembled the unit and bolted it back to the main agitater. works perfect. great service. Thanks Ed PS Now my 97 year old mother in law can keep washing clothes. Shes happy again.
Parts Used:
-
Edward J from Monee, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
The washer would not run
Remove the sides of the washer, motor ran but nothing moved, closer look found drive coupling broke (10 years and it made of plastic) Order a new part from you, arrived very quickly. Install the part 10 min. later it was running.
Parts Used:
-
Robert from Greenville, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Dryer was not heating.
I replaced the Cycling thermostat. At first I thought I may have blamed the wrong part because the ohm meter read almost the same for the old and the new part. It took less than a day for the part to come probably because it came from Jacksonville. I haven't guessed how much I saved by not calling a appliance repair.
Parts Used:
-
Leland from Palm Bay, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Dryer door would not stay shut
Got the latch kit, found the correct one, popped it in...dryer works! Thanks....
Parts Used:
-
Jerry from Yankton, SD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
cogs needed to be replaced
Removed the cap and the unit that held the cogs or dogs. Replaced and reassembled. Took about 5 minutes.
Parts Used:
-
Charles from Madison, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Belt Pulley
The repair went great . Thanks for the part ,will be purchasing parts from you now on.
Parts Used:
-
Katherine from Bay Minette, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Agitator wasn't agitating anything except my wife
Pop the top of the agitator off, 3/8th socket to remove the bolt holding the entire Agitator assembly, pull straight up to remove the entire agitator assembly, remove agitator dog assembly, pull plastic retainer holding agitator dogs in, replace agitator dogs, replace plastic that holds them and just put the thing back together. If it takes more than ten minutes you must have stopped for a beer break
Parts Used:
-
paul from san clemente, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Washer would not spin after washing.
We followed the step by step video that you had posted for those parts. It is now working wonderfully. The repair man had told us it could not be repaired. Thank you so much for having these do it yourself instructions.
Parts Used:
-
Steve from Summerfield, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set, Wrench set
Was this instruction helpful to you?
Thank you for voting!
door would no longer catch when shut
Having read the instructions and watched the tape, I pried out the remaining catch with a flat screwdriver, read about what the color scheme on the parts wasbout and pushed in the correct part. Voila ! Done in probably two minutes.(By an 82 year old woman!)
Parts Used:
-
Leah from Philadelphia, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Machine did not agitate
Followed the video did not need to tilt machine over. Layed on floor it was more comfortable. The most difficult part was putting back on the tension band on top that's because I got a little tired on the food. Thanks for all your help. I bet I saved over $250.00 if a service tech came to fix this. You guys are the best
Parts Used:
-
allen from Hazlet, NJ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
did not agitate
Took the water softener thing off, then there is another cover you just pull up on and it comes right out. pull the thing that has the agitator directional cogs ouy and replace them. Put it all back and you are done
Parts Used:
-
Tim from Wooster, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
make noise, and slow turn the top agitator
real easy i follow your video step by step those video are great txs,.
Parts Used:
-
joel from cary, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Motor coupling broke
Once you take the housing off it's only two clips to remove the water pump from the motor, then two screws and two more clips to remove the motor itself. One issue I ran into was the new coupling was hard to put on, so the first time I did I overheated the motor because it was binding (was also very hard to get the motor back on). After taking it apart again, and slightly tapping both couplings with a hammer the motor went on very easy and washer works like a champ!
Parts Used:
-
Wade from Presque Isle, ME
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!