Models > YMED9600SQ0 > Instructions

YMED9600SQ0 Maytag Dryer - Instructions

All Instructions for the YMED9600SQ0
586 - 600 of 767
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer would not heat to dry clothes
Removed the back panel and observed the Thermal Fuse at the bottom of dryer.One screw and two connectors and changed the fuse. Problem solved and Dryer working again. Easy Fix and Thanks.
Parts Used:
Dryer Thermal Fuse
  • Edwardo from Houston, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
no no heat, no timer advancement
Disconnected electrical outlet, closed gas valve and removed line. Removed back of dryer and disconnected wires to fuse. Did not solve problem.
Parts Used:
Dryer Thermal Fuse
  • Lesley from Yucaipa, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
dryer quit working.
After diagnosing, easy removal and install.
Parts Used:
Dryer Thermal Fuse
  • Jeff from Birmingham, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Shut down
Traced down where power stopped, put jumper in place of the thermal fuse anew found this was the problem. Ordered the part from part select
Parts Used:
Dryer Thermal Fuse
  • Bobby from Hamilton, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
heater went out in the dryer
very simple. actually did a little more then was necessary. once we removed the back of the dryer, used our vacuum to vacuum up all the lint that was back there. Watched the video on how to repair the part when we ordered it and it was easy as can be.. we have used this web site to repair our oven, fridge and now the dryer. Everything went according to plan. I reccomend this site as much as i can and it has saved us a lot of money. Thank you!
Parts Used:
Dryer Thermal Fuse
  • Lisa from PASO ROBLES, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Dryer wouldn't turn on
When I initially inspected the dryer when it stopped working, I noticed a ball of lint had collected on the backside of the thermal fuse. I figured that had allowed the temperature to exceed the fuse's max temp. To relace, I simply removed the dryer's rear panel, disconnected the thermal fuse and replaced it. Once all back together, the dryer powered on with no problem.
Parts Used:
Dryer Thermal Fuse
  • Scott from Cypress, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Noisy/Rattleing Tumbler
First i did some research on the internet approx.1yr ago.Just in case any problems like this or any other kind of problems should arise which it did.The whole thing is Easy all you have to have is some basic knoledge of how things work.All of this came "OFF" in (4) sections.After installing everything back it was as "Quiet"as the day we purchased it.Good for another 5yrs.Retired welder & "J.O.A.T.Julian San Antonio,Texas
Parts Used:
Dryer Repair Kit
  • Julian from San Antonio, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Would not start
Per the electrical diagram that was in the dryer , using a VOLT OHMETER I found the thermal fuse was open. Then ordered the part , arrived the NEXT DAY via Standard Shipping. Easy to replace .
Parts Used:
Dryer Thermal Fuse
  • George from Brooksville, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Dryer was throwing a E1 Error
Took the back dryer cover off and removed the lint cover all from the back of the dryer then replaces the Thermistor (held with 2 screws).
Parts Used:
Thermostat, Internal-Bias
  • John from Indian land, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Door latch was broken
This dryer refuses to die and I am happy to keep it that way. Door latch was replaced in less than a minute using this kit. Easiest repair ever.
Parts Used:
Door Catch Kit
  • William from Champaign, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
My dryer had stop working and the terminal block, wires, and dryer plug burnt out
I replace the terminal block, wires , and dryer plug I unscrewed the back of the dryer and basically replace was burnt out. I was about to pay 200.00 to have it done but I looked on youtube and seen how easy it was so I just chose the site to order what I needed to be replace and it arrived quickly and more affordable to do it myself. Thanks I hope the was useful.
Parts Used:
Terminal Block - Block Only Terminal and Wire Kit
  • tiffanee from antioch, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
door would not close
Slipped screwdriver on top and bottom of catch and pullef out. Pressed new catch in plact. Job finished.
Parts Used:
Door Catch Kit
  • Daniel from Stratford, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Felt wears on the dryer lint screen
No repair. Just replaced the screens in the dryer and they slide in and out to clean. The felt gets worn fast.
Parts Used:
Lint Filter
  • Judy from Cloverdale, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
wouldn't turn on
Followed the instructions and really quite easy to fix. I didn't know why dryer wouldn't turn on but went with the odds that the thermal fuse was the problem-- and it was. Once I got the part it was back together and running in less than 30 minutes!
Parts Used:
Dryer Thermal Fuse
  • Ron from Zionsville, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
dryer would not heat
I am a licensed electrician I found the bad part and I ordered it and when it came in I replaced it.
Parts Used:
Dryer Thermal Fuse
  • richard from cape girardeau, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the YMED9600SQ0
586 - 600 of 767
Back to Top