Models > YKHMS2050SW1

YKHMS2050SW1 KitchenAid Microwave - Overview

Get Parts and Repair Help for YKHMS2050SW1

If you know the microwave repair part you need, you can browse the list of all parts on the YKHMS2050SW1, or you can search by name or part description. You can also find your part by where it is located on the YKHMS2050SW1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$10.77

Charcoal Filter

Sold individually.

$14.04

Surface Light Bulb

Sold individually.

$5.96

Air Filter

Sold individually.

$43.07

Glass Cooking Tray

$13.77

Turntable Driver

Also known as the coupler. This driver is located directly under the glass turntable, and over the motor. This part helps the glass turntable to rotate.

$9.75

Fuse

This part protects the microwave by shutting it off if there is an electrical surge.

$35.54

Damper Assembly

This assembly includes the damper door and frame.

$14.64

Meal Rack with Supports

This rack includes the 4 supports.

$61.84

Door Handle - Stainless Steel

Screws sold separately.

$5.74

SPACER

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Glass cooking tray broke

  • Customer: Mark from Agua Dulce CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 21 of 35 people found this instruction helpful
There was no "fixing" per say but we still could not use the microwave without the plate. This has to be one of the biggest plates for a microwave. We ordered this through your company and we had it three days later. THREE DAYS! We had expected anywhere from 1-2 weeks. My husband was so impressed he bookmarked your site for future reference. Thank you ... read more

Fire in microwave melted several parts

  • Customer: duane from san diego CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 23 of 45 people found this instruction helpful
Remove the filters and use a Torx driver to remove two screws holding the motor. The wires on on the motor are held in place by a plastic clamp that must be pried open on one side. That's all it takes to replace the drive motor. Everything else that makes the turntable spin lifts off from inside the microwave. read more

sparks when turned on

  • Customer: getachew from aldie VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 27 people found this instruction helpful
replace one of the four rack supports which was melting read more